技术

Pipe Bending Machine Technological Characteristics

浏览次数 : 6744
更新时间 : 2015-10-29 09:56:17

Pipe Bending Machine Technological Characteristics

Pipe bending machine,water pipe and pipe outlet

Technological Characteristics:

1 All-around multi-function cold bending machine developed by TYMCC is used for bending water pipe.The bending part is smooth and beautiful,no any crumple,cracks and scratch.This machine and technology have got patent certificate.

2 The ovality of bending part 14%,and the pipe wall thickness reduction rate16%.

3 The diameter of the ball for ball crossing test is more than 0.76 times internal diameter of the water pipe,so technical index is higher than the figure(0.76 times )for the same specified in China Industry Standards of Ferrous Metallurgy YB4073-2007 for blast furnace stave cooler.

4 Hydrostatic test:Testing pressure 2 MPa,for duration of 30 min,and at the same time,striking the water pipe with a 0.75 KG-weight wood hammer,only if no “sweating” occurs,can the tested pipe be qualified for use.

5 The water pipe after bending and forming process will be treated with sand blast for rust removal until metallic luster appears,then carburization prevention treatment will be done before pipes are used.

6 Seamless pipes are all manufactured specially,without any joint within each 10meters length,all measures will be taken to prevent any leakage.

7 Threads at the pipe ends will be made with thread cutting machine.

8 Water pipe bend radian adjusting is done in cold condition,resulting in small tolerance,avoiding oxidization water pipes.So that material quality and heat conduction effect are guaranteed.

Cast Iron Stave Cooler, Water-Cooling Converter Mouth, Cast Iron Tuyere Cooler, Cast Copper Tuyere Cooler, Chequer supports, Cast Iron Water Jaker stave cooler cooling stave cast iron stave cooler blast furnace stave cooler blast furnace cooling stave cast iron cooling stave

关联 新闻
查看更多 >>
又一批炉箅子成功发运加拿大|品质与信赖的见证 又一批炉箅子成功发运加拿大|品质与信赖的见证
Jul .30.2025
我们很高兴宣布,又一批炉箅子已成功交付给我们的长期合作伙伴——达涅利公司(Danieli)。
我们如何从首道切割开始确保铸件精度? 我们如何从首道切割开始确保铸件精度?
Jul .30.2025
在天宇,我们的数控消失模雕刻机是背后默默的力量,确保即使是最复杂、大型的铸件,也能从造型阶段开始就实现卓越的尺寸精度和一致性。
为台塑越南项目提供可靠交付 | 生产透明,成效可见 为台塑越南项目提供可靠交付 | 生产透明,成效可见
Jun .27.2025
我们自豪地完成了一项重大交付——在集中的三个月内,为台塑集团(越南)亚洲最大的工业集团之一,提供了一批高炉生铁冷却壁。
从挑战到合作:国际铸造合作的真实案例 从挑战到合作:国际铸造合作的真实案例
Jun .25.2025
在 METEC 2023 上,我们与高炉领域的长期工程合作伙伴重新建立了联系。